Does Vectorize.io retrieve the source passage when a question words it differently?
Vectorize.io returned the passage that answers a question worded differently from its documents. Asked about "paid time off", a term the documents never use, it ranked first the employee handbook clause giving the 26-day annual leave entitlement, far above unrelated results.
1 of 1 test case passed
Every test case in this scenario has a result.
The test case
Each test case is judged on its own: Pass, Fail, Not gradable, or Untested. The scenario result above is based on this test case.
Question asked with a term absent from the corpusPassEvidence
“How many days of paid time off do employees get each year?”
Copied from Captured file (text), lines 4–21, 23–39, 41–120
question: How many days of paid time off do employees get each year? average_relevancy=0.3112 ndcg=0.9356 --- rank 1 by relevancy --- similarity=0.6550 relevancy=0.8667 source=A04_employee_handbook.docx Employee Handbook Fenwake Instruments Ltd - all locations 1. Working here This handbook sets out the terms that apply to everyone employed by Fenwake Instruments Ltd, whether based at the Bristol workshop, at the Avonmouth calibration laboratory, or working from a customer site or vessel. It forms part of your contract. Where a term is set out in your written statement of particulars and also here, the written statement governs. 2. Hours of work Standard hours are 37.5 a week, worked between 08:00 and 18:00, Monday to Friday. Workshop staff work a 07:30 start by agreement with the workshop manager. Anyone rostered to the out-of-hours duty engineer rota is paid a standby allowance for each week on the rota, and an hourly rate for any hour actually worked while on standby. 2.1 Time recording Hours are recorded against a job number on the day they are worked. A job number is required for chargeable work, for internal projects and for training. Corrections are made by the line manager rather than by editing a submitted week. 3. Annual leave Full-time employees accrue 26 days of annual leave in each complete leave year, which runs from 1 April to 31 March. Part-time employees accrue pro rata. Leave accrues from the first day of employment and may be taken during the probation period with the line manager's agreement. 3.1 Booking leave Annual leave is requested in the rota system and confirmed by the line manager. Requests are considered in the order they are received. Service operations will decline a request that would leave the duty engineer rota uncovered, and will say so within five working days so that alternative dates can be chosen. 3.2 Carry-over Up to five days of untaken annual leave may be carried into the next leave year, and must be taken by 30 June. Anything beyond five days is carried over only where leave could not be taken because of a business requirement, and only with the written agreement of a director. 3.3 Leave on leaving On termination, accrued and untaken annual leave is paid in the final salary payment. Where more leave has been taken than accrued, the balance is deducted from that payment. 4. Sickness absence --- rank 2 by relevancy --- similarity=0.6750 relevancy=0.6891 source=A04_employee_handbook.docx 3.3 Leave on leaving On termination, accrued and untaken annual leave is paid in the final salary payment. Where more leave has been taken than accrued, the balance is deducted from that payment. 4. Sickness absence Report sickness to your line manager before 09:00 on the first day, by telephone rather than by message. Absence of seven calendar days or fewer is self-certified on return. Longer absence requires a fit note. Company sick pay is paid at normal salary for the first four weeks of a continuous absence and at half salary for the following four weeks, after which statutory sick pay alone applies. 4.1 Return to work Every absence is followed by a return-to-work conversation with the line manager. The conversation is recorded in one paragraph on the personnel file. Where an absence relates to a condition that affects offshore or diving work, occupational health is consulted before the employee returns to that work. 5. Expenses Expenses are claimed monthly, with receipts, and reimbursed with the following month's salary. Mileage in a private vehicle is paid at the approved rate. Overnight accommodation is booked through the company travel account wherever possible; where it is not, a room is reimbursed at cost within the regional cap published on the intranet. 6. Notice During probation, notice is one week on either side. After probation, notice is one month for most roles and three months for directors and for the head of service operations. The company may pay in lieu of notice. 7. Training and certification Offshore survival and first-aid certification is renewed at company expense before it expires. Time spent in required training counts as working time. Where an employee leaves within twelve months of a discretionary course costing more than two thousand pounds, a proportion is recoverable, as set out in the training agreement signed before the course. 8. Conduct at sea and on customer sites On a vessel, the master's instructions take precedence over any instruction from Fenwake. On a customer site, the site's permit-to-work system governs. An employee who believes work cannot be done safely is expected to stop it, and will be supported for having done so. 9. Personal data Personnel records are held for the duration of employment and for six years afterwards. Employees may ask to see their record at any time by writing to the operations director. --- rank 3 by relevancy --- similarity=0.5866 relevancy=0.0003 source=A01_field_service_policy_and_charges_uk.pdf Route When Detail Service desk Business hours service@fenwake-instruments.example Service desk telephone Business hours +44 117 496 0188 Out-of-hours pager All other times +44 117 496 0199 9. Exclusions Part A does not apply where the instrument has been modified outside a Fenwake workshop, where a fault is caused by a third-party mooring or cable, or where a customer has declined a recommended firmware update in writing. In those cases the service desk will still respond, and work is quoted at the rates in Part B. 10. Review Part A is owned by the head of service operations and reviewed each spring with the regional service leads. Fenwake Instruments Ltd - Field Service Policy and Charges (United Kingdom) Fenwake internal - service operations Page 7 Part B - Charges outside cover 11. How to read this part The charges below apply to work that falls outside the cover level a customer holds: attendance the contract does not include, work in the exclusions at section 9, and any attendance a customer requests at short notice. Work inside cover is not charged. A callout is charged once per visit. Where an engineer attends on two consecutive days, the second day is charged at the day rate rather than as a second callout. 12. Callout and attendance charges All figures in pounds sterling, excluding VAT. Cover level Weekday callout Out-of-hours callout Offshore day rate Standard 216 352 1,140 Extended 284 487 1,265 Critical 331 615 1,408 Out-of-hours means any call answered outside 08:00 to 18:00, Monday to Friday, and any call answered on a statutory non-working day. The offshore day rate applies to any work carried out from a vessel, whether or not the vessel is under way. Fenwake Instruments Ltd - Field Service Policy and Charges (United Kingdom) Fenwake internal - service operations Page 8 13. Consumables and parts Consumables fitted during an attendance are charged at list. Parts drawn from a regional depot carry no handling charge; parts couriered from the central store carry the courier cost at invoice. Item Unit Charge Anti-fouling guard each 74 Sacrificial anode set set of three 138 --- rank 4 by relevancy --- similarity=0.5870 relevancy=0.0001 source=A01_field_service_policy_and_charges_uk.pdf An acknowledgement is a named engineer taking ownership of the ticket and telling the customer what happens next. An automatic reply from the ticketing system is not an acknowledgement and does not stop the clock. 4.1 What the target does not cover The acknowledgement target is not a repair target. Attendance and parts are dealt with in section 5, and the two clocks run independently: a ticket may be acknowledged inside target and still take several days to close. Fenwake Instruments Ltd - Field Service Policy and Charges (United Kingdom) Fenwake internal - service operations Page 3 5. Attendance and parts Where a fault cannot be cleared remotely, the service desk arranges attendance. Attendance targets are working-day targets and are quoted from the point at which the customer confirms site access. Cover level Attendance target Spares held Standard Five working days Central store only Extended Three working days Central store only Critical Next working day Regional depot 5.1 Consumables Anti-fouling guards, sacrificial anodes and cable glands are consumables. They are replaced during any attendance and charged at the rates in Part B. 5.2 Access Where a site requires a permit, an induction or a vessel movement, the attendance clock is suspended until access is confirmed in writing. The suspension is recorded on the ticket with the reason. Fenwake Instruments Ltd - Field Service Policy and Charges (United Kingdom) Fenwake internal - service operations Page 4 6. Out-of-hours cover Outside business hours the service desk is not staffed. A duty engineer rota covers every hour of the year, and the out-of-hours number in section 8 pages the engineer on call. 6.1 Acknowledgement out of hours A Priority 1 fault reported outside business hours is acknowledged by a named duty engineer within 90 minutes of the ticket being raised. The engineer confirms ownership by telephone and, where the customer asks for it, in writing on the ticket. The target applies on every cover level; the cover level determines what happens after acknowledgement, not how quickly the call is answered. --- rank 5 by relevancy --- similarity=0.5791 relevancy=0.0000 source=A06_nordic_service_addendum.docx Loan pool stock is counted on the first working day of each month and the count is sent to the service desk lead the same day. A discrepancy is investigated before the next issue. 3. Requesting a loan unit 3.1 Who to call Loan requests from customers in the region are met from the Bergen depot. Ring the depot rather than raising a stores request in the system: the stores queue is worked from the workshop and adds a day to anything that could have been handed over the counter. 3.2 What can be lent The Bergen loan pool covers the Brannoc telemetry gateway. A gateway goes out with its own SIM and a configuration file matching the customer's deployment. Where a customer needs an instrument the depot does not hold as loan stock, the depot raises a request against central stores and tells the customer the same day what can and cannot be met locally. Do not promise a loan unit before the depot has confirmed one is free. 3.3 The loan note Every loan is recorded on a signed loan note carrying the ticket number, the serial number issued and the date it is due back. Ten working days is the standard loan period, counted from the day the customer's own instrument is returned to service. An overdue loan is chased by the stores controller at ten and at twenty working days, and after that by the service desk lead. 3.4 Condition on return A returned loan unit is inspected, cleaned and re-certified before it goes back into the pool. A unit returned with a broken calibration seal is treated as damaged, quoted for repair, and does not go back into the pool until the laboratory has passed it. 4. Customs and export Instruments moving between the workshop and a Norwegian site travel under a temporary admission carnet. The carnet number goes on the ticket before the instrument leaves the building; an instrument that travels without one is held at the border and the ticket clock is suspended until it is released. 4.1 Repairs that cross a border Where a repair cannot be completed at Bergen and the instrument must return to the workshop, the depot raises a return note and the customer is told the same day. Return shipping is arranged by the depot, never by the customer, so that the carnet stays valid. 5. Mobilisation
Returned results: the five passages ranked by relevancy, with scores, source and full text
Open the text file ↗| ✓ | Expected: The passage that answers the question still comes back, although the question says "paid time off" and the source says "annual leave".Found: Ranked first, with a relevancy score of 0.8667: the handbook clause stating full-time employees accrue 26 days of annual leave each leave year. Unrelated results scored 0.0003 and below. |
The supporting passage had to come back for a question using "paid time off", a term absent from every document's text. The annual-leave clause came back first by relevancy, clearly above unrelated results, so the result reflects retrieval on meaning.
Raw similarity ranks the answer second. By raw similarity, the second-ranked clause on leave paid when an employee leaves (0.6750) scored above the answering clause (0.6550); the results are ordered by relevancy score, where the answer is clearly first.
Configuration and setup
How this tool was set up for the run and what the test needed in place. Each row is a fact from the run's records; a fact the records do not hold is left out, not guessed.
How this scenario is graded
How we decide Pass, Fail and Not gradable. The same rules apply to every tool tested on this scenario.
Each test case gets one result per tool: Pass, Fail or Not gradable. A test case we haven't run yet shows Untested. There are no partial results.
- Pass: the tool did everything the test expected, and nothing it said contradicts the correct answer.
- Fail: at least one expected behaviour clearly didn't happen; the test case's result says which one and quotes the tool.
- Not gradable: our evidence couldn't settle the outcome (for example a record we needed is missing). It is never counted as a fail, and the test case's result says what's missing.
Where this sits in the benchmark
This page is one cell of a larger study: one tool, one scenario. Only this benchmark's frame appears here.
| Level | Name | Scope |
|---|---|---|
| Benchmark | Managed RAG → | 15 scenarios · 9 tools |
| Capability | Retrieval → | |
| Scenario | The request uses different wording than the source → | |
| Tool | Vectorize.io → |
Global scenario definition → · Global capability definition → · Vectorize.io product page →
History of this result
What has happened to this result since it was first published. Runs and grades are never overwritten: a retest or a re-grade publishes a new result and keeps the earlier one readable.
Act on this result
Nothing filed here edits the run or the grade. A challenge opens a review, and a review can produce a new run or a re-grade — which becomes the current result and leaves this one in the history.
You run the same kind of test against your own setup and get the same behaviour.
Agree →Yours behaves differently. Tell us what you got, with a screenshot if you have one.
Disagree →Something here is wrong — a reference value, a transcription, a grade.
Report an issue →Tell us what changed and we schedule a rerun of the failing test case. The old result stays as history.
Vendor notice →The same record is available as structured data through the AI Demos MCP server, with the counts, the coverage and every per-test-case reason carried as fields.
Verify the proof files
These files support this result. Open a file to inspect the original evidence.
File fingerprints (SHA-256)
A fingerprint identifies the exact file used for this result.