AI Demos Research — the structured-intelligence platform. Every verdict on these pages opens to the execution behind it.
Graded 18 November 2026

Does doc2mark preserve a simple table’s headers, rows, columns and values?

doc2mark preserved the simple table in Markdown, keeping every value under the right header. The output retained the source’s four headers and eight data rows.

1 of 1 test case passed

Every test case in this scenario has a result.

Pass rate100%1 of 1 gradable
Coverage1 of 1test case with a result
1PassDid everything it was expected to do.
0FailNo test case failed.
0Not gradableEvery result here could be graded.
0UntestedEvery test case in this scenario has a result.
The pass rate is a summary. The evidence is the test case below: what we sent, what we checked, what the tool returned, and the proof.

The test case

Each test case is judged on its own: Pass, Fail, Not gradable, or Untested. The scenario result above is based on this test case.

Simple table — structure retainedPassEvidence
What we sent

We converted the complete laboratory price-schedule PDF to Markdown in one library call.

InputDocument (PDF)
Input PDF: the laboratory price schedule with a four-column table on its first page
Open the PDF ↗
What the tool returned
Markdownthe whole file · cited lines 1–6 and 13–23 marked
## Kirkhollow Analytical Laboratories Ltd

Braithe Road, Vardenne BR7 2HD
01632 960118  ·  reception@kirkhollow-labs.example

# Schedule of Analysis Charges

Applicable from 1 April 2026  ·  Supersedes the schedule of 1 April 2025

The charges below apply to samples submitted under an open account. They are per sample and
exclude value added tax. Turnaround is counted in working days from booking in, not from delivery.

| Determination | Method | Turnaround | Charge per sample |
| --- | --- | --- | --- |
|  |  |  |  |
| Total suspended solids | KAL-M04 | 2 days | £18.40 |
| Chloride | KAL-M11 | 3 days | £21.75 |
| Ammoniacal nitrogen | KAL-M12 | 4 days | £26.50 |
| Total oxidised nitrogen | KAL-M13 | 5 days | £29.20 |
| Orthophosphate | KAL-M15 | 6 days | £31.60 |
| Dissolved organic carbon | KAL-M22 | 7 days | £44.05 |
| Metals suite, eleven elements | KAL-M31 | 8 days | £96.80 |
| Particle size distribution | KAL-M47 | 10 days | £58.35 |

Samples that require digestion before analysis are charged at the rate shown plus £9.15. A minimum charge of £75.00
applies to a single submission. Determinations not listed are quoted on request.

## How to submit samples

Every submission needs a completed submission form, which is available from reception, from the sampling
officer, or as a download. The form asks for the client reference, the sampling point, the date and time of
sampling, the determinations required and a contact for the report. A submission that arrives without a form is
booked in as received but is not analysed until the form follows, and the turnaround runs from the day the form
arrives.

Samples may be delivered to reception between 08:00 and 17:30 on weekdays and between 09:00 and 12:00
on Saturdays. Clients who hold a key may use the refrigerated drop box at the rear entrance outside those
hours. Anything left elsewhere on the site is not accepted, and anything left in the drop box over a weekend is
booked in on the Monday.

## Containers and preservation

Containers are supplied without charge in the quantities a client's usual programme requires, and are collected
on the same round wherever that is practical. Containers for metals are acid-washed and must not be rinsed at
the sampling point. Containers for microbiology are sterile and single-use. Samples arriving in containers this
laboratory did not supply are accepted at the client's risk, and the report carries a note to that effect.

Preservation up to the point of delivery is the client's responsibility. Samples for suspended solids and for
particle size need no preservative but should be kept cool and delivered within twenty-four hours. Samples for
ammoniacal nitrogen should be chilled from the moment of sampling; a result on a sample that has not been is
reported with a note saying so.

Kirkhollow Analytical Laboratories Ltd  ·  Registered in England 2214887

<!-- page 2 -->
Schedule of Analysis Charges
Applicable from 1 April 2026

## Turnaround and priority work

The turnaround shown against each determination is the normal one and is counted in working days from
booking in. It is the time to the issue of the report and not the time to the analysis, which is usually a day or two
earlier. A submission arriving after 15:00 is booked in on the following working day.

Priority work is accepted where the laboratory has capacity. A submission marked priority is booked in ahead of
the queue and reported in half the normal turnaround, rounded up to the next working day, and is charged at
the rate shown plus fifty per cent. Priority cannot be arranged retrospectively: a submission already in the
queue keeps its place.

## Reports

Reports are issued by e-mail to the contact named on the submission form, with a copy to the account address
where the two differ. A report is issued once. A corrected report, where one is needed, is issued as a new
document with its own number and says on its face what it replaces and why.

Results are reported against the method used and to the number of figures that method supports. A result
below the limit of detection is reported as less than that limit and never as zero. The laboratory does not
interpret results against a standard or a discharge consent unless the client asks in writing, and such an
interpretation is quoted separately.

## Sampling by the laboratory

The laboratory will take samples on a client's behalf where the site is within thirty miles of Braithe Road.
Sampling is charged by the visit and not by the sample: sixty-eight pounds for a visit of up to two hours and
thirty-four pounds for each hour after that, with the analysis charged at the rates above. A visit that cannot be
completed because the site is inaccessible is charged at half rate.

Where our own staff take the sample the report says so, and the laboratory accepts responsibility for the
manner of sampling as well as for the analysis. That is the only circumstance in which it does.

## Hazardous samples

A sample known or suspected to contain anything hazardous must be declared on the submission form, with
the hazard and the reason for suspecting it. An undeclared hazardous sample is a serious matter: the
submission is stopped, the client is telephoned, and the laboratory may decline further work from that source
until it is satisfied about the declaration.

The laboratory does not accept asbestos in any form, material of unknown provenance, or material from a site
under a statutory notice without prior arrangement. Nothing in this schedule obliges the laboratory to accept a
sample it judges unsafe to handle.

## Subcontracted analysis

A determination not held in-house is subcontracted to a named laboratory and charged at cost plus ten per
cent. The report identifies every subcontracted result and names the laboratory that produced it. A client may
refuse subcontracting on the submission form, in which case the determination is returned as not undertaken
rather than sent out.

## Quality control

Every batch carries a blank, a duplicate and a spiked recovery, and is not reported until all three are within their
control limits. Where a control fails, the batch is repeated from the retained sample; where the retained sample
is insufficient the client is told and asked whether to resample.

<!-- page 3 -->
Schedule of Analysis Charges
Applicable from 1 April 2026

The laboratory takes part in the quarterly proficiency scheme for each accredited determination. Scheme results
for the last two years are available to clients on request, including the two occasions in that period on which a
result fell outside the acceptable range.

## Confidentiality

Reports and the data behind them belong to the client, and the laboratory releases neither to a third party
except where a statute requires it or the client has agreed in writing. Where a statute requires it the laboratory
tells the client, unless telling the client is itself prohibited.

Anonymised results are used for the laboratory's own quality control and method development, and appear in
accreditation assessments. Nothing that identifies a client or a site is used in that way.

## Accreditation

Accreditation covers the methods listed with the exception of the particle size method, for which results are
reported as not accredited. The current schedule of accreditation is available on request and is reissued
whenever it changes. A method under assessment is reported as accredited only from the date the assessment
is confirmed, whatever the date of the analysis.

## Standard conditions

1. These conditions apply to all work carried out by the laboratory unless a written agreement says otherwise.
2. Results relate only to the samples as received. The laboratory does not accept responsibility for the manner
   of sampling unless its own staff took the sample.
3. An account is due thirty days from the date of invoice. The laboratory may decline to book in further work on
   an account more than sixty days in arrears.
4. Charges are reviewed each April. The schedule in force on the day a submission is booked in is the schedule
   that applies to it.
5. Analysed samples are kept for twenty-eight days after the report is issued and are then disposed of. A client
   who needs a sample kept longer must say so on the submission form.
6. The laboratory's liability for any submission is limited to the charge for that submission, except where a
   statute provides otherwise.
7. A complaint about a report should be made in writing within twenty-eight days of its issue and will be
   answered within ten working days.
8. These conditions are governed by the law of England and Wales.

Returned Markdown: the four headers, eight data rows and an added empty row

Copied from Output file (Markdown), lines 1–6, 13–23

Open the Markdown file ↗
Expected vs. Found
✓Expected: Retain the table’s headers, rows, columns and values in table form.Found: The Markdown table retained all four source headers and all eight source data rows, with each row’s four values unchanged and under the right headers.
Supporting proof
Proof 1Screenshot
Execution screenshot: the conversion console, returned Markdown and source pricing table
Open original ↗
Why this result

Preserving the table’s information was required. The added empty row below the headers lost no content and shifted no values, so it does not prevent a pass.

Also observed in this test case

Masthead heading hierarchy. The laboratory name in the masthead became a second-level heading above the document title’s top-level heading.

Tested by Vamshidhar Rao Thumula · evidence dated 18 November 2026

Configuration and setup

How this tool was set up for the run and what the test needed in place. Each row is a fact from the run's records; a fact the records do not hold is left out, not guessed.

Software that produced the output
doc2mark
Build or version
doc2mark 0.7.1
Surface
SDK / library
Set up before the run
The complete laboratory price-schedule PDF, containing a simple table, had to be converted to Markdown in one pass with default processing, without cropped pages or tool-specific adjustments.
Text recognition provider
none
Tested
18 November 2026 · Vamshidhar Rao Thumula

How this scenario is graded

How we decide Pass, Fail and Not gradable. The same rules apply to every tool tested on this scenario.

How results are decided

Each test case gets one result per tool: Pass, Fail or Not gradable. A test case we haven't run yet shows Untested. There are no partial results.

The rules
  • Pass: the tool did everything the test expected, and nothing it said contradicts the correct answer.
  • Fail: at least one expected behaviour clearly didn't happen; the test case's result says which one and quotes the tool.
  • Not gradable: our evidence couldn't settle the outcome (for example a record we needed is missing). It is never counted as a fail, and the test case's result says what's missing.

Where this sits in the benchmark

This page is one cell of a larger study: one tool, one scenario. Only this benchmark's frame appears here.

History of this result

What has happened to this result since it was first published. Runs and grades are never overwritten: a retest or a re-grade publishes a new result and keeps the earlier one readable.

from the publication record
20 November 2026First publishedConverting a complex PDF into clean Markdown with an open-source library v1

Act on this result

Nothing filed here edits the run or the grade. A challenge opens a review, and a review can produce a new run or a re-grade — which becomes the current result and leaves this one in the history.

This matches what I see

You run the same kind of test against your own setup and get the same behaviour.

Agree →
This does not match

Yours behaves differently. Tell us what you got, with a screenshot if you have one.

Disagree →
Point out an issue

Something here is wrong — a reference value, a transcription, a grade.

Report an issue →
Request a retest

On a newer build, a larger dataset, or your own setup.

Request a retest →
We have fixed this

Tell us what changed and we schedule a rerun of the failing test case. The old result stays as history.

Vendor notice →
Filed against this evidenceNothing yet. Challenges, counter-evidence and fix notices appear here with their outcome, and stay on the page after they are resolved.
Cite this result
aidemos.com/benchmarks/pdf-to-markdown-open-source/results/doc2mark/a-simple-clearly-formatted-table · 1 pass · 0 fail · coverage 1/1 · graded 2026-11-18

The same record is available as structured data through the AI Demos MCP server, with the counts, the coverage and every per-test-case reason carried as fields.

Verify the proof files

These files support this result. Open a file to inspect the original evidence.

Input · Document (PDF) ↗application/pdf · 92 KB
Output file (Markdown) ↗text/markdown; charset=utf-8 · 9 KB
Proof 1 · Screenshot ↗image/png · 167 KB
File fingerprints (SHA-256)

A fingerprint identifies the exact file used for this result.

Input · Document (PDF)2f2a8244eb2e45042de1c4652eeebc8b14c579f55c5a1a8b73e7b21e051e5ee7
Output file (Markdown)0821d50f450bef25ea7f468f418198583019902e14dbcafc8c62008540e162a2
Proof 1 · Screenshot559eb3cfde9fd7fd21c4609e3f02b82f60230fd1686659983308694922fcf1ba